Chat on WhatsApp
CMA Data Knowledge Series

CMA Data Financial Ratios Explained — What Every Bank Checks

A plain-English guide to every ratio in your CMA report — what it means, the exact formula, the limit banks expect, and how to improve it before you apply.

10 Key Ratios
Acceptable Limits
Real Formulas
How to Improve
Get Your Ratios Checked Free

🔑 Want to See the Complete CMA Format?

The full sample format — every sheet, with real numbers — is yours free. Just fill the quick form below and it unlocks instantly.

Why Ratios Decide Your Loan, Not Just Profit

Many business owners assume that a healthy profit guarantees loan approval. In reality, banks look past the profit figure and run your CMA Data through a set of financial ratios. These ratios reveal whether your business is liquid, well-capitalised, efficient, and capable of repaying — the four things every credit officer must confirm.

This sheet — the Performance & Financial Indicators page of your CMA — is the first thing a bank manager opens. If your ratios fall outside the accepted range, the limit gets reduced or the file gets rejected, no matter how good your sales look.

Good news: these ratios are formula-driven. Once your Operating Statement, Liabilities, and Assets sheets are built correctly, the ratios fall into place. The art lies in keeping projections realistic so the ratios land inside the bank's comfort zone — that is exactly what we do for you. See the full 7-sheet CMA guide →

The 10 Ratios Banks Check — One by One

Liquidity

Current Ratio

Current Assets ÷ Current Liabilities
Bank Expects Minimum 1.33 : 1

What it measures: Whether your business has enough short-term assets (cash, stock, debtors) to cover its short-term dues. A Current Ratio of 1.33 means you hold ₹1.33 of current assets for every ₹1 of current liability.

This is the single most important liquidity benchmark in CMA. The 1.33 : 1 norm comes from the Tandon Committee — it ensures at least 25% of working capital is funded by your own long-term sources (the margin), not entirely by the bank.

If below 1.33  The bank sees liquidity stress and will either cut the sanctioned limit or ask you to bring in more margin money/capital.

Deep dive: how to improve your Current Ratio →
Leverage

TOL / TNW

Total Outside Liabilities ÷ Total Net Worth
Bank Expects Below 3 : 1 (ideally ≤ 2)

What it measures: How much of the business is funded by outsiders (all liabilities — banks, creditors, loans) versus the owner's own money (net worth). It is the key leverage / gearing ratio.

A TOL/TNW of 2 means for every ₹1 of your own capital, the business carries ₹2 of outside liabilities. Lower is safer — it shows the owner has real skin in the game.

If above 3  The business is considered over-leveraged. Banks become reluctant because most of the risk sits with lenders, not the promoter.

Deep dive: reducing TOL/TNW before applying →
Repayment Capacity

DSCR

(Net Profit + Depreciation + Interest on Term Loan) ÷ (Term Loan Instalment + Interest)
Bank Expects Minimum 1.5 (avg 1.75–2)

What it measures: Whether your business generates enough cash to comfortably pay its loan EMIs. This is the most important ratio for term loans (machinery, property, vehicle).

A DSCR of 1.5 means you earn ₹1.50 of cash for every ₹1 of loan repayment due — a 50% cushion. Banks look at both the yearly DSCR and the average DSCR over the loan tenure.

If below 1.5  The bank doubts repayment ability and may reduce the loan amount or extend the tenure to bring DSCR up.

Deep dive: DSCR for Term Loans explained →
Servicing Ability

PBDIT / Interest

Profit Before Dep, Interest & Tax ÷ Annual Interest
Bank Expects Minimum 1.5 times

What it measures: Also called the Interest Coverage Ratio — how many times your operating earnings can cover the interest you owe each year.

A ratio of 3 means your profit (before interest) is 3 times the interest bill — very comfortable. The higher the number, the easier you absorb interest, even in a slow year.

If below 1.5  A bad year could leave you unable to pay interest. Banks treat this as an early warning sign of default risk.

Liquidity

Net Working Capital

Current Assets − Current Liabilities (excl. bank borrowing)
Bank Expects Positive & growing

What it measures: The amount of long-term funds you have parked in day-to-day operations. It is your own contribution (the margin) towards working capital.

Positive and rising NWC tells the bank your business funds part of its own working capital and is not surviving purely on short-term bank money.

If negative  It signals the business is running entirely on borrowed short-term funds — a serious red flag that usually leads to rejection.

Deep dive: Net Working Capital explained →
Profitability

PAT / Net Sales

Net Profit After Tax ÷ Net Sales × 100
Bank Expects Minimum 5%+ (higher better)

What it measures: Your net profit margin — how many paise of profit remain from every rupee of sales after all costs and taxes.

Margins vary by industry (trading is thinner, manufacturing/services thicker), but a stable or improving margin across the projected years reassures the bank that growth is genuine, not loss-making expansion.

If very thin / falling  The bank questions whether the business can absorb interest costs and still survive. Wildly high margins look unrealistic and also raise doubts.

Efficiency

ROCE

PBDIT ÷ Total Assets × 100
Bank Expects Above 10% (higher better)

What it measures: Return on Capital Employed — how efficiently the business generates earnings from all the capital (own + borrowed) put into it.

A high ROCE shows assets are being used productively. Banks like to see ROCE comfortably above their lending rate — it means the business earns more on the money than it pays in interest.

If low  Capital is sitting idle or assets are underused. The bank worries the new loan will also be used inefficiently.

Efficiency

Operating Cost / Sales

Total Operating Cost ÷ Net Sales × 100
Bank Expects Below 90% (ideally 75–85%)

What it measures: What share of every sales rupee is eaten up by running costs. The lower this is, the more profit is left over.

Banks check that this ratio stays stable across the projection years. A sudden drop in cost ratio to inflate future profits is a classic red flag credit officers look for.

If above 90%  Margins are wafer-thin; any cost shock could push the business into a loss and threaten repayment.

Working Capital Cycle

Inventory + Receivable Days

(Inventory + Debtors) ÷ Net Sales × 365
Bank Expects Lower better (under 90 days)

What it measures: How many days of sales are tied up in unsold stock and uncollected customer dues — the length of your working capital cycle.

This number directly justifies how much working capital limit you genuinely need. A shorter cycle means money returns faster and less bank finance is required.

If too high  Cash is stuck in stock and debtors. The bank sees collection/inventory inefficiency and cash-flow risk — and may probe your numbers harder.

Asset Productivity

Net Sales / TTA

Net Sales ÷ Total Tangible Assets
Bank Expects Higher = more efficient

What it measures: Also called asset turnover — how many rupees of sales each rupee of tangible assets generates.

A ratio of 3 means every ₹1 of assets produces ₹3 of sales — efficient use of the asset base. Trading businesses naturally score higher than asset-heavy manufacturing.

If low  Assets are not pulling their weight; the bank may question fresh investment if existing assets are underutilised.

Quick Reference — All Ratios at a Glance

Use this as a checklist before you submit your CMA Data. If any ratio is outside the range, fix it before the bank sees it.

Ratio Category Acceptable Range
Current RatioLiquidityMinimum 1.33 : 1
TOL / TNWLeverageBelow 3 : 1 (ideally ≤ 2)
DSCRRepayment CapacityMinimum 1.5 (avg 1.75–2)
PBDIT / InterestInterest ServicingMinimum 1.5 times
Net Working CapitalLiquidityPositive & growing
PAT / Net SalesProfitabilityMinimum 5%+
ROCEEfficiencyAbove 10%
Operating Cost / SalesEfficiencyBelow 90% (ideally 75–85%)
Inventory + Receivable DaysWC CycleUnder 90 days
Net Sales / TTAAsset ProductivityHigher is better

Are Your Ratios Bank-Ready?

Send us your figures on WhatsApp. We'll tell you honestly which ratios qualify and which need work — before you apply. Completely free.

🔒 Don't Leave Without the Real Format

Reading helps — but seeing the actual sample CMA makes it click. Fill the short form and we'll instantly unlock the complete format samples.

Frequently Asked Questions

Which is the most important ratio in CMA Data?
It depends on the loan type. For working capital loans, the Current Ratio (min 1.33) and TOL/TNW are most critical. For term loans, DSCR is the single most important ratio. Across both, banks always check leverage (TOL/TNW) and liquidity (Current Ratio) first.
Why is the Current Ratio benchmark 1.33 and not 2?
The 2:1 figure is an old textbook ideal. Indian banks follow the Tandon Committee norm of 1.33:1 for working capital lending, because it ensures the borrower funds at least 25% of working capital from their own long-term sources while keeping the requirement practical for real businesses.
Can I improve my ratios just before applying for a loan?
Some ratios can be genuinely improved — for example, bringing in fresh capital raises net worth (improving TOL/TNW and Current Ratio), and collecting old debtors shortens your working capital cycle. However, the ratios in your CMA must tie back to your actual books. We help you present a realistic, defensible picture — not fabricated numbers, which banks easily detect.
What if one ratio is weak but the others are strong?
Banks assess the overall picture, not a single ratio in isolation. One weak ratio with a clear explanation (e.g. a one-time large purchase) can be acceptable if liquidity, leverage, and repayment capacity are otherwise sound. The key is a consistent story across all 7 CMA sheets.
Do you provide the CMA report in Excel?
We deliver the final CMA Data as a clean, ready-to-submit PDF report, formatted exactly the way your bank expects. We walk you through every key ratio on a call so you fully understand your own numbers before submitting.

Unlock the Complete CMA Format — Free

Fill the form and get the complete CMA format instantly. Want free consultancy too? Just tick the box — it’s optional.


Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top