Chat on WhatsApp
CMA Data Knowledge Series

MPBF Calculation — How Banks Decide Your Working Capital Limit

Understand exactly how Maximum Permissible Bank Finance is calculated — both methods, with a real worked example — so you know the limit your business qualifies for.

Both Methods Explained
Worked Example
Drawing Power
Know Your Limit
Find My Working Capital Limit Free

🔑 Want to See the Complete CMA Format?

The full sample format — every sheet, with real numbers — is yours free. Just fill the quick form below and it unlocks instantly.

What is MPBF?

MPBF stands for Maximum Permissible Bank Finance. It is the highest working capital limit — Cash Credit (CC) or Overdraft (OD) — that a bank is willing to sanction to your business.

When you apply for working capital, the bank does not simply give the amount you ask for. It uses your CMA Data to calculate the right limit scientifically, based on your current assets, liabilities, and turnover. That calculated figure is your MPBF — and the bank will not lend beyond it.

In short: MPBF is the ceiling. Your requested limit must fall within it. A well-prepared CMA presents the MPBF clearly using both accepted methods, so the bank can sanction with confidence.

Why Banks Calculate MPBF

The MPBF system came from the Tandon Committee and was simplified for smaller borrowers by the Nayak Committee. The goal is to fund the genuine working capital gap — no more, no less:

❌ Too much limit
leads to diversion of funds and turns into a bad loan (NPA) for the bank.
❌ Too little limit
starves the business of cash, causing default anyway.

MPBF gives the bank a defensible, formula-based limit using your own numbers — which is exactly why a clean CMA showing both methods speeds up approval.

The Two Methods of MPBF Calculation

Banks compute MPBF using two methods and generally sanction the lower of the two. Both are shown in your CMA report:

Method 1 — Turnover Method

Nayak Committee — for limits up to ₹5 crore (most MSMEs)
  1. Take your projected annual turnover (A)
  2. 25% of turnover (B) = total working capital your business needs
  3. 5% of turnover (C) = minimum margin you must bring
  4. Net Working Capital available (D) = Current Assets − Current Liabilities
  5. Margin used = higher of C or D (E)
  6. MPBF = 25% of turnover − E
MPBF = 25% of Turnover − Higher of (5% of Turnover OR NWC)

Method 2 — Traditional Method

Tandon Committee — for established businesses & larger limits
  1. Total Current Assets (inventory + receivables + cash)
  2. Less: Current Liabilities other than bank borrowing (creditors etc.)
  3. = Working Capital Gap (WCG)
  4. Less: Margin — 25% on inventory, 40% on receivables (your contribution)
  5. MPBF = Working Capital Gap − Margin
MPBF = (Current Assets − Current Liabilities) − Margin
The Turnover Method is simpler and used for most small businesses; the Traditional Method is more detailed and used as limits grow. Curious which ratios the bank checks alongside MPBF? See our CMA Ratios guide →

Worked Example — ₹54 Lakh Turnover Business

Here is how both methods play out for a retail business with a projected turnover of ₹54 lakhs (figures in ₹ Lacs):

ParticularsMethod 1 — TurnoverMethod 2 — Traditional
Projected Turnover₹54.00₹54.00
Working Capital Need25% = ₹13.50Current Assets = ₹13.43
Less: Current Liabilities—₹0.11
Working Capital Gap—₹13.32
Margin (your contribution)₹3.32 (NWC, higher than 5%)₹3.05 (25% inv + 40% rec)
MPBF₹10.18₹10.27
Bank Sanctions (lower, rounded)₹10.00 Lakhs ✓
Both methods land close to ₹10.2 lakhs, so the bank sanctions a clean ₹10 lakh CC limit. Notice the business must fund roughly ₹3 lakhs itself (the margin) — the bank funds the rest. A clear, consistent CMA like this gets approved fast.

Want to Know Your Exact MPBF?

Share your turnover and balance sheet figures with us. We'll calculate the working capital limit you qualify for — free, before you even apply.

Which Method Will Your Bank Use?

Your SituationMethod Typically Applied
Working capital limit up to ₹5 crore (most MSMEs)Turnover Method (Nayak)
Limit above ₹5 crore / larger companyTraditional Method (Tandon)
New or growing business with rising turnoverTurnover Method — simpler to justify
Inventory/receivable-heavy businessTraditional Method — reflects real cycle
In practice, most banks compute both and sanction the lower figure. That's why your CMA should present both clearly — which is exactly how we prepare it. See the full Working Capital CMA guide →

MPBF vs Drawing Power (DP)

Borrowers often mix these up. They are related but not the same:

MPBF (Sanctioned Limit)Drawing Power (DP)
The maximum limit fixed at sanction timeThe amount you can actually draw this month
Calculated once, from your CMA projectionsRecalculated monthly from your stock & debtor statements
Stays fixed until renewal (usually yearly)Moves up and down with your current stock and receivables, after margin
Key point: You can draw only up to whichever is lower — your DP or your sanctioned MPBF limit. If your stock and debtors fall, your DP falls even though the MPBF limit stays the same. Keeping healthy stock and collecting debtors keeps your DP near your full limit.

How We Prepare Your CMA in 24 Hours

1

Free Consultation

Tell us your turnover, loan requirement, and the bank you're applying to. We confirm the MPBF you can expect.

2

Document Collection

Share your ITR, financials, GST returns, and bank statements securely via WhatsApp or email.

3

Expert Preparation

We build all 7 CMA sheets including the MPBF assessment by both methods, tuned to your bank's format.

4

Review & Delivery

We explain your MPBF and key ratios on a call, then deliver a clean, ready-to-submit PDF report.

5

Unlimited Revisions

If the bank asks for changes, we revise free until your working capital limit is sanctioned.

Unlock the Complete CMA Format — Free

Fill the form and get the complete CMA format instantly. Want free consultancy too? Just tick the box — it’s optional.


🔒 Don't Leave Without the Real Format

Reading helps — but seeing the actual sample CMA makes it click. Fill the short form and we'll instantly unlock the complete format samples.

Frequently Asked Questions

What does MPBF stand for?
MPBF stands for Maximum Permissible Bank Finance — the highest working capital limit (CC/OD) a bank will sanction based on your CMA Data. Your requested limit must stay within the MPBF.
How is MPBF calculated under the Turnover Method?
Under the Nayak Committee Turnover Method, MPBF = 25% of projected annual turnover minus the higher of (5% of turnover) or your Net Working Capital. The bank funds 20% of turnover while you contribute at least 5% as margin. This method applies to working capital limits up to ₹5 crore.
Why does the bank sanction the lower of the two methods?
Banks compute MPBF by both the Turnover and Traditional methods as a cross-check and sanction the lower figure to stay conservative. This protects the bank from over-financing and keeps your limit aligned to your genuine working capital need.
What is the difference between MPBF and Drawing Power?
MPBF is the maximum limit fixed at sanction. Drawing Power (DP) is what you can actually withdraw at any time, recalculated monthly from your stock and debtor statements after margin. You can draw only up to the lower of DP or the MPBF limit.
Can I increase my MPBF / working capital limit?
Yes — a higher projected turnover, healthier current ratio, and stronger net working capital all increase your MPBF. Bringing in more capital also helps. We structure realistic, defensible projections so your CMA supports the highest justifiable limit.
Do you provide the MPBF working in Excel?
We deliver your complete CMA — including the MPBF assessment by both methods — as a clean, ready-to-submit PDF report formatted the way your bank expects. We explain every number to you on a call before submission.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top